LS V8-3.9L VIN A (2003)
9. Remove the door latch screws and position the door latch aside.
INSTALLATION
1. To install, reverse the removal procedure.
Item 2: Front Door Window Glass Installation Note
1. Position the front door window glass against the B-pillar.
2. Make sure the front door window glass correctly seats in the glass mounting brackets as the front door window glass is raised.
3. Support the front door window glass and raise the window regulator to the full upright position.
4. Tighten the door regulator clamp bolts after the glass is fully seated in the clamp.
Item 8: Door Inner Module Assembly Installation Note
1. Make sure the alignment dowels are seated before installing the inner door module bolts
2. Tighten the inner door module bolts next to the alignment dowels first.
