Mark LT 2WD V8-5.4L (2008)
Removal and Installation
Both cables
1. Press the tabs inward and lower the glove compartment completely.
2. Disconnect the upper-to-lower satellite radio antenna cable connection.
Upper satellite radio antenna cable
3. Remove the RH A-pillar trim panel.
4. Remove the 3 screws, the RH sun visor retaining clip, and the RH sun visor.
-
If equipped, disconnect the electrical connector.
5. Lower the front of the headliner enough to gain access to the satellite radio antenna electrical connector.
6. Remove the upper satellite radio antenna cable.
-
Disconnect the electrical connector.
-
Separate the pushpins from the A-pillar and instrument panel.
Lower satellite radio antenna cable
7. Remove the audio control module (ACM).
8. Remove the lower satellite radio antenna cable.
-
Disconnect the electrical connector.
-
Separate the pushpins from the instrument panel.
Both cables
9. To install, reverse the removal procedure.
