Mark LT 2WD V8-5.4L (2008)
8. Remove the front bumper cover pin-type retainers.
Vehicles equipped with wheelhouse lip mouldings
9. Remove the 4 retaining nuts.
10. Remove the fender splash shield pin-type retainers.
11. Remove the 4 fender splash shield screws.
12. Position aside the wheelhouse lip mouldings.
-
Disconnect the 6 wheelhouse lip moulding clips.
13. Release the retaining clips.
All vehicles
14. Remove the bumper cover bolts located at the headlamp openings.
15. Remove the front bumper cover.
16. To install, reverse the removal procedure.