Mark LT 2WD V8-5.4L (2008)
Rear Door Panel: Service and Repair
SuperCab
DOOR TRIM PANEL - REAR, SUPERCAB
Removal and Installation
1. Remove the rear window garnish mouldings.
2. Remove the 3 rear door trim panel screws.
3. Remove the rear window control switch.
-
Disconnect the rear window control switch electrical connector.
4. Remove the door handle bezel bolt.
5. Remove the rear door handle cover plate
6. Remove the 2 rear door handle bolts.
7. Remove the rear door handle.
8. CAUTION: Do not pull directly outward on the rear door trim panel, as damage may occur.