Mark LT 2WD V8-5.4L (2008)
Keyless Entry Transmitter: Removal and Replacement
TAILGATE LATCH REMOTE CONTROL
Exploded View
Removal and Installation
1. Open and support the tailgate.
2. Remove the 8 screws and the tailgate access panel.
-
To install, tighten to 5 Nm (44 lb-in).
3. Open the 2 clips and release the 2 tailgate latch actuating rods from the tailgate remote control.
4. Release the 2 tailgate latch actuating rod locators from the tailgate.
5. Remove the 2 nuts and the tailgate remote control.
-
To install, tighten to 7 Nm (62 lb-in).
6. To install, reverse the removal procedure.