Mark LT 2WD V8-5.4L (2008)
Disc Brake System - Exploded View (Part 2)
1. Remove the rear axle.
2. Remove the parking brake shoes.
3. Remove the 4 brake caliper support bracket nuts and bolts.
^
To install, tighten to 81 Nm (60 lb-ft).
4. If equipped, drill out the 2 rivets.
^
Protect the seal and bearings from chips.
^
It is not necessary to install new rivets.
5. Separate the brake disc shield from the brake caliper support bracket and the rear axle housing.
6. To install, reverse the removal procedure.