Mark LT 2WD V8-5.4L (2008)
Air Door Actuator / Motor: Service and Repair
Mode Door Actuator
Air Inlet Door
MODE DOOR ACTUATOR - AIR INLET DOOR
Removal and Installation
1. Remove the instrument panel.
2. Disconnect the air inlet mode door actuator electrical connector.
3. Remove the 3 air inlet mode door actuator screws.
4. Remove the air inlet door mode door actuator.
5. To install, reverse the removal procedure.
Defrost/Panel/Floor Door
MODE DOOR ACTUATOR - DEFROST/PANEL/FLOOR DOOR
Removal and Installation
