Mark LT 2WD V8-5.4L (2008)
4. Do not remove the transmission fluid filter. It is not necessary to change the transmission fluid filter during a normal maintenance transmission
fluid change.
5. Clean and inspect the transmission fluid pan, transmission fluid pan gasket and magnet.
6. Thoroughly flush the transmission fluid cooler tubes.
Refill
1. Position the magnet into the transmission fluid pan.
2. NOTE: The transmission fluid pan gasket is reusable, clean and inspect for damage. If not damaged, the transmission fluid pan gasket should be
reused.
Install the transmission fluid pan and transmission fluid pan gasket.
1
Position the transmission fluid pan with the transmission fluid pan gasket in place.
2
Install the bolts.
^
Tighten to 14 Nm (10 lb-ft).