Mark LT 2WD V8-5.4L (2008)
4. Connect the large RCM electrical connector.
-
Using the connector position assurance lever, pivot it toward the RCM, drawing the connector into the RCM.
-
Make sure the thumb tab is engaged to the retainer on the RCM and locked in place.
5. Connect the RCM small electrical connector.
6. If equipped, install the floor console.
7. If equipped, install the 20 percent front seat cushion. Align the retainers on the 20 percent seat cushion and press down firmly near the front of the
cushion to seat the retainers.
8. Repower the SRS.