Mark LT 2WD V8-5.4L (2008)
4. CAUTION: Install new head restraint guides if the releasing tabs are damaged during removal.
NOTE: The inboard and outboard head restraint guides are not interchangeable.
Access and remove the 2 head restraint guides.
-
Release the locking tabs and pull the head restraint guides out of the backrest frame tubes.
5. Detach the 2 safety belt tower screw covers.
6. Remove the 4 screws and the safety belt tower.
7. Remove the screw and separate the safety belt guide.
8. Lift the backrest trim cover material and release the J-clip.
