Mark LT 2WD V8-5.4L (2008)
All vehicles
1. Install the extension housing and gasket.
1
Install the extension housing and gasket.
2
Install the bolts.
^
Tighten to 27 Nm (20 lb-ft).
2. Raise and position the transmission.
3. Position the rear transmission insulator and install the bolts.
^
Tighten to 80 Nm (59 lb-ft).
4. Position the crossmember and loosely install the transmission mount-to-crossmember nut.
5. Install the 4 crossmember-to-frame nuts and bolts.
^
Tighten to 115 Nm (85 lb-ft).