Mark LT 2WD V8-5.4L (2008)
6. Lower the transmission on the crossmember and tighten the rear mount nuts.
^
Tighten to 103 Nm (76 lb-ft).
7. Install the bolts retaining the exhaust hanger to the crossmember.
^
Tighten to 40 Nm (30 lb-ft).
8. Remove the high-lift transmission jack.
9. Install the bolt for the LH heat shield to the transmission support crossmember.
^
Tighten to 20 Nm (15 lb-ft).
