Mark LT 2WD V8-5.4L (2008)
8. NOTE: The differential housing cover must be installed within 15 minutes of application of the silicone, or new sealant must be applied. If
possible, allow one hour before filling with lubricant to ensure the silicone sealant has correctly cured.
Install the differential housing cover and the differential housing cover bolts.
^
Tighten to 45 Nm (33 lb-ft).
9. NOTE: For Traction-Lok axles, first fill the axle with 118 ml (4 oz) of friction modifier.
NOTE: Service refill capacities are determined by filling the axle with the specified lubricant to the specified level below the bottom of the filler
hole.
Remove the fill plug, fill the axle to the level shown with axle lubricant and install the filler plug.
^
Tighten to 30 Nm (22 lb-ft).
