Mark LT 2WD V8-5.4L (2008)
3. Remove the 3 washer fluid reservoir bolts.
-
To install, tighten to 7 Nm (62 lb-in).
4. Remove the washer fluid reservoir.
5. CAUTION: When installing a new windshield washer pump, be careful not to damage the rubber grommet.
Remove the windshield washer pump.
6. CAUTION: Do not operate the washer pump prior to filling the windshield washer reservoir. Failure to follow these instructions may
result in premature pump failure.
To install, reverse the removal procedure.
