Mark LT 2WD V8-5.4L VIN 5 (2007)
3. Disconnect the trough guide rods from the lifter arm assemblies.
4. Slide the trough guide back to the slot (approximately 15 mm [0.6 in]) cut in the track.
5. Carefully twist the trough guide through the slot in the track to remove.
6. Inspect the trough guide assembly for damage. If damage is found, inspect the track for broken pieces and remove them.
7. NOTE: If necessary, adjust the roof opening panel.
To install, reverse the removal procedure.
8. Initialize the roof opening panel motor.
