Mark LT 2WD V8-5.4L VIN 5 (2007)
3. NOTE:
-
The inboard and outboard head restraint sleeves are not interchangeable.
-
If necessary, install new head restraint sleeves.
Push the release tabs and pull the head restraint sleeves out of the frame tube (trim cover and foam pad removed for clarity).
4. Release the backrest J-clips.
5. CAUTION: Use care when separating the seat upholstery from the hook-and-loop strip, or the hook-and-loop strip can be torn from the
seat backrest foam pad.
Separate the hook-and-loop fasteners.
6. Remove the hog rings. Remove the seat trim cover and the backrest foam pad.