lincoln Workshop Repair Guides

Lincoln Workshop Service and Repair Manuals

Seat Track - Manual|Page 8556 > < Seat Track - Manual|Page 8554
Page 6
background image

Front Seat Cushion - Passenger (Part 2)

Exploded View

Special Tool(s)

Special Tool(s)

Removal and Installation

WARNING:

-

The safety belt pretensioner is a pyrotechnic device. Always wear safety glasses when repairing an air bag equipped vehicle and when
handling a safety belt buckle pretensioner or safety belt retractor pretensioner. Never probe a pretensioner electrical connector. Doing so
could result in pretensioner or air bag deployment and could result in personal injury.

-

To reduce the risk of personal injury, do not use any memory saver devices.

NOTE:

-

Repair is made by installing a new part only. If the new part does not correct the condition, install the original part and carry out the diagnostic
procedure again.

-

If a seat equipped with a supplemental restraint system (SRS) component is being serviced, the SRS must be depowered.

-

The air bag warning lamp illuminates when the restraints control module (RCM) fuse is removed and the ignition switch is ON. This is normal
operation and does not indicate a supplemental restraint system (SRS) fault.

-

The SRS must be fully operational and free of faults before releasing the vehicle to the customer.

All seats

1. Remove the seat and depower the SRS.

Seat Track - Manual|Page 8556 > < Seat Track - Manual|Page 8554