Mark LT 2WD V8-5.4L VIN 5 (2007)
3. CAUTION: To avoid breaking the retaining hooks on the cowl grille panel, do not pull up on the rear of the cowl grille panel.
Release the front edge of the left cowl grille panel.
-
Starting at the center of the vehicle, depress the forward tab and press upward on the front edge of the cowl grille panel to release it from the
cowl.
-
Continuing out from the center of the vehicle, depress the remaining forward tabs and release the rest of the front edge of the cowl grille panel
from the cowl.
4. Release the 4 retaining hooks.
-
Starting at the left fender, press down to release the outer retaining hook, then lightly pull up on the front edge of the cowl grille panel.
-
Continuing toward the center of the vehicle, release the remaining hooks.
5. Disconnect the windshield washer hose.
6. Remove the left cowl grille panel.
7. Remove the cowl panel grille screw from the right cowl panel grille.
8. Remove the right cowl panel grille pin-type retainer.
9. CAUTION: To avoid breaking the retaining hooks on the cowl grille panel, do not pull up on the rear of the cowl grille panel.
Release the front edge of the right cowl grille panel.
-
Starting at the center of the vehicle, depress the forward tab and press upward on the front edge of the cowl grille panel to release it from the
cowl.
-
Continuing out from the center of the vehicle, depress the remaining forward tabs and release the rest of the front edge of the cowl grille panel
from the cowl.
10. Release the 4 retaining hooks.
-
Starting at the right fender, press down to release the outer retaining hook, then lightly pull up on the front edge of the cowl grille panel.
-
Continuing toward the center of the vehicle, release the remaining hooks.
