Mark LT 2WD V8-5.4L VIN 5 (2007)
Removal
1. Recover the refrigerant.
2. Remove the powertrain control module (PCM) and bracket.
3. Remove the RH ignition coils.
4. Remove the nut and disconnect the A/C compressor manifold tube.
^
Discard the O-ring seals.
5. Remove the suction accumulator-to-A/C compressor manifold tube stud.
6. Disconnect the evaporator inlet tube fitting.
^
Discard the O-ring seals.
7. Disconnect the quick connect couplings and remove the crankcase ventilation tube.
8. If equipped, disconnect the vacuum tube.