Mark LT 2WD V8-5.4L VIN 5 (2007)
4WD vehicles
6. CAUTION: Use care when positioning the front axle housing, or the vacuum lines to the axle solenoid may become disconnected or damaged.
Position the front axle housing and loosely install the 3 bolts, aligning the bolt location marks made during removal.
7. Install the front axle housing RH mounting bolt.
^
Tighten to 89 Nm (66 ft. lbs.).
8. Install the front axle housing LH front mounting bolt.
^
Tighten to 89 Nm (66 ft. lbs.).
9. Install the front axle housing LH rear mounting bolt.
^
Tighten to 89 Nm (66 ft. lbs.).