Mark LT 2WD V8-5.4L VIN 5 (2007)
All vehicles
10. Position the frame crossmember and the 4 bolts.
^
Tighten to 102 Nm (75 ft. lbs.).
11. Attach the starter wiring harness support bracket.
12. Fill the crankcase with clean engine oil.
All vehicles
10. Position the frame crossmember and the 4 bolts.
^
Tighten to 102 Nm (75 ft. lbs.).
11. Attach the starter wiring harness support bracket.
12. Fill the crankcase with clean engine oil.