Mark LT 2WD V8-5.4L VIN 5 (2007)
3. Install a new engine front cover gasket on the engine front cover. Position the engine front cover onto the dowels. Install the fasteners finger tight.
4. Tighten the engine front cover fasteners in the sequence shown in 2 stages.
^
Stage 1: Tighten fasteners 1 through 15 to 25 Nm (18 ft. lbs.).
^
Stage 2: Tighten fasteners 6 and 7 to 48 Nm (35 ft. lbs.).
