Mark LT 2WD V8-5.4L VIN 5 (2007)
must be installed.
Position the muffler and tailpipe assembly.
2. Install the front muffler exhaust hanger bracket and isolator to the frame.
^
Tighten to 30 Nm (22 ft. lbs.).
3. Install the rear muffler exhaust hanger bracket and isolator to the frame.
^
Tighten to 30 Nm (22 ft. lbs.).
4. Install the tailpipe exhaust hanger bracket and isolator to the frame.
^
Tighten to 30 Nm (22 ft. lbs.).
5. Align the exhaust system and tighten the exhaust system clamps.
4. Remove the bolt and the idler pulley.
^
To install, tighten to 25 Nm (18 ft. lbs.).
5. To install, reverse the removal procedure.