Mark LT 2WD V8-5.4L VIN 5 (2007)
4. NOTE: To exit the compass zone adjustment before carrying out the compass zone adjustment procedure, press the INFO button on the message
center switch.
Press and hold the reset button on the LH top of the compass module until RESET FOR ZONE and the current setting (1-15) appears in the
message center display.
5. Press the SETUP button on the message center switch repeatedly until the correct geographic location for your area is displayed in the message
center.
6. Press the RESET button to exit the zone setting procedure and to lock your selected zone setting. The message center displays CALIBRATION
COMPLETE.
Without Message Center
COMPASS ZONE ADJUSTMENT
Without Message Center
1. NOTE: The compass zone setting is preset from the factory to Zone 8.
Determine which magnetic zone you are in for your geographic location.