Mark LT 2WD V8-5.4L VIN 5 (2007)
8. Connect the power steering pressure line and install the power steering line clamp plate bolt.
^
Tighten to 23 Nm (17 ft. lbs.).
9. Position the oil drip shield and install the 2 bolts.
^
Tighten to 10 Nm (89 inch lbs.).
10. If equipped, install the skid plate and the 4 skid plate bolts.
^
Tighten to 25 Nm (18 ft. lbs.).
11. Fill the power steering system.
^
Check and, if necessary, align the front end.
