Mark LT 2WD V8-5.4L VIN 5 (2007)
6. NOTE: The manual lever must be in the NEUTRAL position.
Using the special tool, align the digital TR sensor slots. The tool is designed to fit snug.
7. CAUTION: Tightening one screw before tightening the other may cause the sensor to bind or become damaged.
Tighten the digital TR sensor bolts.
^
Tighten to 9 Nm (80 inch lbs.).
8. Install the manual control lever.
1
Position the manual control lever.
2
Install a new manual control lever nut.
^
Tighten to 33 Nm (24 ft. lbs.).
9. Connect the digital TR sensor electrical connector.