Mark LT 2WD V8-5.4L VIN 5 (2007)
4WD vehicles
13. Install the front driveshaft and align the index marks made during removal. Install the 4 bolts.
^
Tighten to 103 Nm (76 ft. lbs.).
14. Install the front driveshaft shield and install the 2 nuts.
^
Tighten to 18 Nm (13 ft. lbs.).
All vehicles
15. NOTE: Start by filling the transmission with 4.7 liters (5 quarts) of clean automatic transmission fluid.
Fill the transmission to the correct level with clean automatic transmission fluid.
