Mark LT 2WD V8-5.4L VIN 5 (2007)
Shifter A/T: Service and Repair
Selector Lever Cable - Column Shift
Selector Lever Cable - Column Shift
Removal
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Disconnect the electrical connector from the selector lever cable.
3. NOTE: 4.6/5.4L shown, 4.2L similar.
Disconnect the selector lever cable from the transmission.
1
Disconnect the cable from the manual lever.
2
Disconnect the cable from the cable bracket.
4. Remove the selector lever cable from the routing clip.
5. Remove the 2 screws and the lower dash panel.