Mark LT 2WD V8-5.4L VIN 5 (2007)
9. CAUTION: The driveshaft centering socket yoke fits tightly on the pinion flange pilot. To make sure that the driveshaft centering socket yoke
seats squarely on the pinion flange, tighten the driveshaft flange bolts evenly in a cross pattern.
Install the driveshaft flange bolts.
^
Tighten to 103 Nm (76 ft. lbs.).
10. Install the brake disc.
11. Install the disc brake caliper and the disc brake caliper bolts.
^
Tighten to 27 Nm (20 ft. lbs.).