Mark LT 2WD V8-5.4L VIN 5 (2007)
NOTE: Align the index marks made during removal.
To install, reverse the removal procedure.
^
Install new driveshaft flange bolts.
Driveshaft - Rear, Two-Piece
Driveshaft - Rear, Two-Piece
Material
Removal and Installation
NOTE: For automatic transmissions, when installing a new driveshaft, match the yellow dots on the driveshaft to the yellow dots on the pinion flange
and the output shaft to maintain balance during installation.
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer Maintenance/Service and Repair.