Mark LT 2WD V8-5.4L VIN 5 (2007)
5. Secure the rear door glass in the full upward position with tape.
6. NOTE: Some vehicles may use rivets instead of rear door window glass-to-regulator assembly bolts.
Remove the rear door window glass-to-regulator assembly bolts.
-
To install, tighten to 11 Nm (8 lb-ft).
7. Disconnect the rear door window motor electrical connector.
8. Remove the rear door window regulator assembly bolts.
-
To install, tighten to 11 Nm (8 lb-ft).
9. Remove the rear door window regulator assembly.
10. To install, reverse the removal procedure.
SuperCrew
Window Regulator And Motor - Rear Door, SuperCrew
SuperCrew
Exploded View