Mark LT 4WD V8-5.4L VIN 5 (2006)
2. If equipped, remove the window regulator handle.
1
Separate the handle cover from the handle.
2
Remove the screw.
3
Remove the window regulator handle.
4
Remove the spacer.
3. Remove the cover plate.
4. Remove the 2 screws.
5. Remove the window control switch.
-
Disconnect the window control switch electrical connectors.
6. Remove the bolt.
7. Remove the 2 front door lower bolts.
8. Remove the watershield.
9. Remove the 2 speaker standoffs.
10. Remove the front door handle.
-
Guide the door handle through the opening in the trim panel.
11. CAUTION: Do not pull directly outward on the front door trim panel, as damage may occur.
Remove the front door trim panel.
-
Lift upward to remove the front door trim panel.
12. To install, reverse the removal procedure.