Mark LT 4WD V8-5.4L VIN 5 (2006)
Rear Door Window Glass: Service and Repair
SuperCrew
REAR DOOR WINDOW GLASS - SUPERCREW
Removal and Installation
1. Remove the rear door trim panel.
2. Remove the rear door mounted speaker.
3. Remove the rear door interior moulding.
4. Remove the rear door watershield.
5. NOTE: Some vehicles may use rivets instead of rear door window glass-to-regulator assembly bolts.
Remove the rear door window glass-to-regulator assembly bolts.
-
To install, tighten to 11 Nm (8 lb-ft).
6. Remove the rear door window glass.
-
Pull the rear door window glass out through the top inboard side of the door.
7. To install, reverse the removal procedure.