Mark LT 4WD V8-5.4L VIN 5 (2006)
6. Through the glove compartment opening, connect the LH passenger air bag module electrical connector.
7. Close the glove compartment.
8. Remove the restraint system diagnostic tools from the clockspring electrical connectors at the top of the steering column.
9. CAUTION: The clockspring electrical connectors are unique and cannot be reversed when connected to the driver air bag module.
Match the electrical connector key to the keyway in the driver air bag module. Do not force the electrical connectors into the driver air
bag module.
Install the driver air bag module.
1
Connect the 2 electrical connectors (1 shown).
2
Connect the driver air bag module electrical connectors as noted during removal.
3
Position the driver air bag module to the steering wheel.
