Mark LT 4WD V8-5.4L VIN 5 (2006)
Power Mirror Motor: Service and Repair
Exterior Mirror Motor
EXTERIOR MIRROR MOTOR
Removal and Installation
NOTE: If equipped with power folding mirrors, they must be synchronized any time the mirrors have been folded or unfolded without using the mirror
control switch. Refer to Exterior Mirror Motor Synchronization - Power Folding. See: Exterior Mirror Motor Synchronization - Power Folding
1. Remove the exterior rear view mirror glass.
2. Remove the 3 exterior rear view mirror motor screws.
3. Disconnect the exterior rear view mirror motor electrical connector.
4. Remove the exterior rear view mirror motor.
5. To install, reverse the removal procedure.
-
If equipped, synchronize the power folding mirrors.