Mark LT 4WD V8-5.4L VIN 5 (2006)
Sunroof / Moonroof Frame: Service and Repair
Trough Assembly
TROUGH ASSEMBLY
Removal and Installation
NOTE: The roof opening panel motor must be initialized when repairs are carried out on any part of the roof opening panel, including: whenever the
roof opening panel motor has been removed from the roof opening panel assembly, a new roof opening panel motor has been installed or when a new
roof opening panel frame has been installed.
1. Remove the roof opening panel glass.
2. Remove the 2 trough guide retaining screws.
3. Remove the trough from the trough guide assembly.
4. NOTE: If necessary, adjust the roof opening panel.
To install, reverse the removal procedure.
5. Initialize the roof opening panel motor.
