Mark LT 4WD V8-5.4L VIN 5 (2006)
Tailgate Latch: Service and Repair
Tailgate Latch
TAILGATE LATCH
Removal and Installation
NOTE: The LH side is shown, the RH side is similar.
1. Open and support the tailgate.
2. Remove the 8 screws and the tailgate access panel.
-
To install, tighten to 5 Nm (44 lb-in).
3. Open the clip and release the tailgate latch actuating rod from the tailgate remote control.
4. Release the tailgate latch actuating rod locator from the tailgate.
5. Remove the tailgate latch bolt.
-
To install, tighten to 25 Nm (18 lb-ft).
6. Remove the tailgate latch bolt and the tailgate latch cable.
-
To install, tighten to 25 Nm (18 lb-ft).
7. Remove the tailgate latch.
8. To install, reverse the removal procedure.
-
Lubricate the tailgate latch after installation.