Mark LT 4WD V8-5.4L VIN 5 (2006)
Cowl Moulding / Trim: Service and Repair
COWL PANEL GRILLE
Removal and Installation
CAUTION: The cowl grille panels are secured to the cowl with molded retaining hooks. Prying or pulling straight up on the cowl grille panels
will break the hooks. If the hooks are damaged, a new cowl grille panel must be installed.
NOTE: It is necessary to remove the left cowl grille panel before removing the right cowl grille panel.
1. Remove the wiper pivot arms.
2. Remove the left cowl panel grille pin-type retainer.
