Mark LT 4WD V8-5.4L VIN 5 (2006)
5. Tighten the bolts in 3 stages, in the sequence shown.
^
Stage 1: Tighten to 2 Nm (18 inch lbs.).
^
Stage 2: Tighten to 20 Nm (15 ft. lbs.).
^
Stage 3: Tighten an additional 60 degrees.
4WD vehicles
6. CAUTION: Use care when positioning the front axle housing, or the vacuum lines to the axle solenoid may become disconnected or damaged.
Position the front axle housing and loosely install the 3 bolts, aligning the bolt location marks made during removal.
7. Install the front axle housing RH mounting bolt.
^
Tighten to 89 Nm (66 ft. lbs.).
