lincoln Workshop Repair Guides

Lincoln Workshop Service and Repair Manuals

Ambient Temperature Sensor / Switch HVAC > < Temperature Blend Door Actuator|Page 7404
Page 2
background image

1. NOTE:  The defrost/panel/floor mode door actuator can be accessed from underneath the LH side of the instrument panel.

Disconnect the defrost/panel/floor mode door actuator electrical connector.

2. Remove the 3 defrost/panel/floor mode door actuator screws.
3. Remove the defrost/panel/floor mode door actuator.
4. To install, reverse the removal procedure.

Ambient Temperature Sensor / Switch HVAC > < Temperature Blend Door Actuator|Page 7404