Mark LT 4WD V8-5.4L VIN 5 (2006)
14. Through the glove compartment opening, release the tabs and disconnect the RH passenger air bag module electrical connector.
15. Attach the restraint system diagnostic tool to the vehicle harness side of the RH passenger air bag module electrical connector.
16. Install the RCM fuse 19 (10A) to the CJB.
17. Connect the battery ground cable.
Reactivation
1. Remove the RCM fuse 19 (10A) from the CJB.
2. Disconnect the battery ground cable and wait at least one minute.
3. Remove the restraint system diagnostic tool from the vehicle harness side of the RH passenger air bag module electrical connector.
