Mark LT 4WD V8-5.4L VIN 5 (2006)
Ball Joint: Specifications
Ball Joint Wear Limit
If deflection exceeds .................................................................................................................................................................................. 0.8mm (0.032 in)
NOTE: In order to obtain an accurate measurement, the dial indicator should be aligned as close as possible with the vertical axis (center line) of the
ball joint.
^
To measure ball joint deflection, attach a suitable dial indicator with a flexible arm between the lower control arm and the wheel knuckle or ball
joint stud.
^
Measure the ball joint deflection while an assistant pushes up and pulls down on the wheel and tire assembly, by hand.
^
If the deflection exceeds the specification, a new ball joint must be installed.
Upper ball joint nut ................................................................................................................................................................................. 115 Nm (85 ft. lbs.)
Upper arm-to-frame nuts ...................................................................................................................................................................... 150 Nm (111 ft. lbs.)
Lower ball joint nut .............................................................................................................................................................................. 150 Nm (111 ft. lbs.)