Mark LT 4WD V8-5.4L VIN 5 (2006)
Suspension Spring ( Coil / Leaf ): Service and Repair
Front 4X4
Removal and Installation
Shock Absorber and Spring Assembly
Removal and Installation
Disassembly and Assembly
For additional information regarding service and repair 4x4, refer to 4x2 procedures.
Disassembly and Assembly
DISASSEMBLY AND ASSEMBLY
Shock Absorber and Spring Assembly
Disassembly and Assembly
WARNING: All vehicles are equipped with gas-pressurized shock absorbers which will extend unassisted. Do not apply heat or flame to the
shock absorbers during removal or component servicing. Failure to follow these instructions may result in personal injury.
CAUTION: Suspension fasteners are critical parts because they affect performance of vital parts and systems and their failure can result in major
service expense. A new part with the same part number must be installed if installation becomes necessary. Do not use a replacement part of lesser
quality or substitute design. Torque values must be used as specified during reassembly to make sure of correct retention of these parts.
1. Remove the shock absorber and spring assembly.
