Mark LT 4WD V8-5.4L VIN 5 (2006)
2. NOTE: The main control valve body bolts will be tightened in later steps.
Loosely install the 11 long main control valve body bolts.
3. NOTE: The main control valve body bolts will be tightened in later steps.
Loosely install the 12 short main control valve body bolts.
4. NOTE: Lubricate the EPC solenoid O-rings with clean automatic transmission fluid.
Position the EPC solenoid bracket and loosely install the bolt.
5. Install the manual control valve detent lever spring and loosely install the bolt.
