Mark LT 4WD V8-5.4L VIN 5 (2006)
7. NOTE: LH side shown, RH side similar.
Compress and hold the cable tension spring.
8. NOTE: LH side shown, RH side similar.
Press the transition block away from the centerline of the vehicle, then snap it into the groove. Release the cable tension spring.
9. NOTE: LH side shown, RH side similar.
The transition block is correctly seated when its top edge is +/- 10 mm (0.39 in) above the top of the window opening.
10. Install the rear corner trim. For SuperCab vehicles, install the B-pillar trim panel. For SuperCrew vehicles, install the C-pillar trim panel.
All vehicles
11. Install the rear trim panel.
