Mark VI V8-302 5.0L (1982)
Blower Motor: Service and Repair
1982---83 MARK VI & 1982---88 TOWN CAR
1.
Disconnect battery ground cable.
2.
Disconnect blower motor lead from wiring harness, then remove blower motor cooling tube from blower motor.
3.
Remove the four blower motor retaining screws.
4.
Rotate motor and wheel assembly slightly to the right so that bottom edge of mounting plate follows contour of wheelwell splash panel, then lift
the motor and wheel assembly up and out of housing.
5.
Reverse procedure to install.
