Mark VI V8-302 5.0L (1982)
Power Window Switch: Service and Repair
RH Front Door Window Switch
Removal and Installation
1. Remove ash receptacle and screw from the rear end of the bezel.
2. Lift the bezel and switch away from the armrest.
3. Remove the connector retaining screws and separate the switch from the bezel.
4. The switch is held in place by the electrical contact pins.
To remove, carefully pry the switch from the connector with a small screwdriver.
5. To install the switch, position the switch to the connector and press firmly together.
6. Reverse Steps 1 through 3 for installation.
