Mark VII V8-302 5.0L HO (1986)
D.
Connect the new harness to the coolant temperature switch and attach the eyelet terminal of the harness to an available drill dimple on the cowl
with a No. 8 drill point screw (381801-S36B).
E.
Fill the coolant system and run the engine to check for coolant leaks. Then, add coolant to the cooling system as necessary.
F.
Check the EATC system for proper operation, including the cold engine blower lock-out function.
PART NUMBER
PART NAME
CLASS
E4DZ-18472-D
Inlet Hose - Heater
C
E4DZ-18472-A
Inlet Hose - Heater
C
E5SZ-18B402-A
Tube Assembly
C
E6LY-18472-C
Return Hose - Heater
C
E6LY-19D570-A
Jumper Wire
C
E6FZ-14488-A
Splice Clip
C
381801-S36B
No. 8 Drill Point Screw
S
C9AZ-8287-A
Hose Clamp
AG
E5SZ-18D371-A
Switch Assembly
B
E6SZ-19D887-A
Jumper Harness
C
OTHER APPLICABLE ARTICLES: None
WARRANTY STATUS: Reimbursable within the provisions of the Warranty and Policy Manual.
OPERATION: SP18371A86
TIME:
0.5 Hr. DLR. CODING: Basic Part No. 18B402 - Code: 42