Mark VII V8-302 5.0L HO (1986)
Rocker Arm Assembly: Customer Interest
Engine - Valve Train Clatter
NOISE - 5.0L H.O. - VALVE TRAIN CLATTER -
Article No.
VEHICLES BUILT 03/01 /86 TO 10/31/86
87-7-11
FORD:
1986 MUSTANG
LINCOLN-MERCURY: 1986-87 MARK VII LSC
ISSUE:
A valve train "clattering" noise during engine operation, in the 1000 to 2000 RPM range may be caused by the rocker arm fulcrum seat and
rocker arm assembly.
ACTION:
To reduce the valve "clattering" noise, install the new design rocker arm fulcrum seats and rocker arm assemblies contained in the valve
rocker arm kit, E7AZ-6564-A. Refer to the following service/diagnostic procedure.
NOTE:
The valve rocker arm kit (E7AZ-6564-A) contains sixteen (16) rocker arm fulcrum eats and sixteen (16) rocker arm assemblies.
1.
Check to see if engine has valve train "clattering" noise in the 1000 to 2000 RPM range. Refer to the Car Shop Manual, Section 21-01 and the
Gasoline Engine Overhaul Techniques and Principles Manual, Page 10.
2.
If the "clattering" noise is present, remove and throw away the existing rocker arm fulcrum seats and rocker arm assemblies. Refer to the 1986 or
1987 Car Shop Manual, Section 21-21.
3.
Install the new valve rocker arm kit, E7AZ-6564-A.
PART NUMBER
PART NAME
CLASS
E7AZ-6564-A
Valve Rocker Arm Kit -
B
1 Required
OTHER APPLICABLE ARTICLES: None
WARRANTY STATUS: Reimbursable within the provisions of the Warranty and Policy Manual
OPERATION: SP870711A
TIME:
2.2 Hrs.
DLR. CODING: Basic Part No. 6564 - Code: 56
