Mark VII V8-302 5.0L HO (1986)
Fuel Injector: Service and Repair
*** UPDATED BY TSB #88-17-11
NOTE: First try cleaning a problem injector with the Rotunda Tester/Cleaner before replacing a possible good injector.
1.
Remove fuel manifold as previously described.
2.
Remove electrical connectors from injectors as required.
3.
Pull injector(s) out of manifold.
4.
Remove O-rings and pintle protective cap and inspect for wear or damage. Replace as necessary.
5.
Reverse procedure to install. Lubricate O-rings with suitable light oil.